CCR ZINC Rod Lines
Continuus-Properzi is strongly present in this market segment, as we have supplied zinc CCR lines ranging from 1 tph up to 5 tph and above to meet our customers’ specific needs.
Special High Grade (SHG) zinc is of the highest purity (99,995% according to EN 1179 – “Z1”) and is used in the production of zinc wire and zinc alloy wire. The application of zinc coatings by spraying is a method of anticorrosive protection.
The market must offer ample quantities of either pure zinc or zinc-aluminium (up to 15% Al) alloy wire with precise physical, mechanical and geometrical properties in diameters ranging from 1.2 to 3.2 mm and above.
MAIN ADVANTAGES OF METALLIZED COAT
|Possibility to metallize structures at the construction area
|Possibility to repair/reapply the coating on construction site
|Thickness can be easily adjusted to suit the operational requirements
|No dimensional limitations regarding the dimensions of the elements to be coated
|High resistance against mechanical defects
|Eliminates the risk of thermal deformations of the protected elements
*Each line described above is configured in order to permit the production of both zinc and zinc alloy wire with minimum modification and with dedicated furnaces. The furnaces used for zinc alloys cannot be used for pure zinc if not appropriately washed.
|CCR ZINC ROD/WIRE LINE
|YEARLY PRODUCTION (metric tons)
|working 5 days/week
|working 7 days/week
|CCR ZN 1
|CCR ZN 2
|CCR ZN 3
|CCR ZN 5
Properzi equipment installed since our founding in 1947.
*It may not coincide with the number of Properzi plants currently in operation.